Something stops working, and the first question is always whether it is a simple fix or something deeper. A dead outlet might be a tripped GFCI two rooms away. A breaker that keeps dropping might be an overloaded circuit or a panel that has been running at capacity for years. Working out which one it actually is, before any parts are ordered or any wiring is touched, is where the job starts. We handle electrical work throughout Clayton and the surrounding area, and the diagnostic is always part of what we do.
Clayton's mix of older homes, multi-unit buildings, and commercial properties means the calls we take vary considerably. A property manager dealing with an outlet that stopped working in a rental unit has a different situation than a homeowner whose panel has no room for a new circuit. We handle both, along with everything in between. We are available every day from 8:30 AM to 8:00 PM, and the scope of the job is worked out on the call before anyone is dispatched.
Getting on the schedule starts with a phone call. You describe what you are seeing, and we work through what the visit will involve and what it will cost before the appointment is set. That conversation also covers what access is needed, whether the panel has to be reachable, and whether the work will require the power to come off for part of the visit.
Some situations do not wait well. A sparking outlet, a burning smell near the panel, or a breaker that will not reset and will not stay on are not problems to leave on a list until a convenient time opens up. We take short-notice calls and answer every day within our posted hours. When you reach us, you get a real person who knows the trade and can scope the problem on the phone.
For tenants and businesses that have to stay open, the timing of the visit matters. We confirm what the work requires before the appointment is set. Call us and the rest is handled.
On a renovation or an addition, the order of trades is not a formality. Framing has to be up before wiring can be run. Wiring has to be roughed in and inspected before insulation goes in. Insulation has to be in before drywall closes everything up. When the electrical is not planned into that sequence from the start, the job either stalls or someone is cutting into finished walls to run circuits that should have been roughed in weeks earlier.
We work with contractors, general managers, and property owners on projects where the electrical is one part of a larger job. That means being on site at the right stage, not after the walls are closed, and understanding what the finished space will need in terms of circuits, panel capacity, and load before the rough-in starts. A kitchen renovation that adds a range, a dishwasher, and an island with outlets has a different electrical footprint than the original room, and the panel has to support it.
Additions and build-outs regularly surface a panel capacity question. If the existing panel is already near its limit, adding circuits for a new space is not straightforward. A load calculation tells you what the panel is currently carrying and what headroom is left. If there is not enough, a subpanel or a service upgrade becomes part of the project scope rather than a surprise at the end. We give a plain answer on repair versus upgrade before any work is scheduled.
A refrigerator, an electric range, a dryer, or a chest freezer each draws enough current that sharing a circuit with other loads leads to problems. The circuit trips under normal use, or the appliance runs less efficiently because the voltage is not stable. A dedicated circuit runs directly from the panel to a single outlet or connection point, sized to what the appliance actually draws. The installation involves a load check at the panel, the right wire gauge for the run, and the correct outlet type at the end.
A ceiling fan installation is straightforward when the existing box in the ceiling is rated for a fan. When it is not, the box has to be replaced with one that can carry the weight and the movement before the fixture goes up. Older homes in Clayton sometimes have ceiling boxes that were installed for a light fixture only, and putting a fan on one of those is a safety issue, not a minor shortcut. We check the box before anything else, and handle the wiring from there.
Panels fail gradually, not all at once. Breakers that trip under loads they should handle, a panel that runs warm, corrosion inside the enclosure, or a box that simply has no room for additional circuits are all signs the panel is at the end of its useful life. A replacement involves removing the old equipment, installing a new panel sized for current and anticipated demand, reconnecting the circuits to current code, and confirming grounding and bonding are correct throughout. For older properties in St. Louis County, service-entrance and meter upgrades sometimes come into the conversation at the same time.
Properties with a well pump or an irrigation system need circuits sized to the motor load, not just the general electrical demand of the house. A well pump that shares a circuit with other loads can cause voltage drops that shorten the pump's life. A dedicated circuit, properly sized and grounded, keeps the pump running correctly. Irrigation systems with multiple zones and a controller have their own wiring requirements. We handle the circuit installation and confirm the panel has capacity for the added load before any work begins.
Older properties present a specific challenge: the equipment in them was manufactured to specifications that are no longer current, and replacement parts are not always available off the shelf. A breaker for an older panel may have to be sourced rather than picked up locally. A fixture or switch that matches the existing finish in a historic property may need to be ordered. In some cases, the right answer is that the obsolete component has to be replaced with a current equivalent, which sometimes means updating the surrounding wiring or enclosure to match.
We work through that conversation before the visit, where possible. If a part has to be ordered, you are told that on the call so the appointment is scheduled for when the work can actually be completed rather than for a visit that ends with a return trip. Code-compliant wiring on every job means we do not fit a part that technically works but does not meet current standards. Plenty of Clayton jobs start with a look at our services page for electrical work.
The price for electrical work depends on what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry what is being added or changed. A straightforward outlet replacement has a different scope than an outlet replacement that uncovers damaged wiring behind the wall. A panel upgrade on a home with a 100-amp service has a different scope than one on a home that already has 200-amp service and just needs a new enclosure.
You get the price on the call, before anything is scheduled. The scope is confirmed before work begins. If the diagnostic visit turns up something beyond what was discussed, that gets explained and priced before any additional work is done. Ask what it covers and you get a straight answer.
Real answers. Real pricing. Real fast response.
We serve Clayton and the surrounding communities throughout St. Louis County. That includes Richmond Heights, University City, Brentwood, Maplewood, and Pagedale, along with the broader area around them. If your property is in the area, call and we will confirm we can get to you.
Coverage is not limited to one type of property. Homes, rental units, commercial spaces, and mixed-use buildings all come up in the same service area. The work is scoped the same way regardless of the property type.
Permit requirements depend on the type of work and where it falls under local code. Panel replacements, new circuits, and service upgrades typically require a permit and an inspection before the work is considered complete. Straightforward repairs and replacements sometimes do not. We confirm what applies to your specific job before anything is scheduled, so the permitting question is answered as part of the scope conversation rather than after the fact.
A breaker that trips at predictable times usually points to a load that pushes the circuit past its rated capacity when it runs. The most common pattern is a circuit that handles a mix of everyday loads and then gets pushed over the edge when a larger appliance, like an air conditioner or electric oven, cycles on at the same time. We trace the load back through the circuit to find where the demand is coming from.
Call (636) 746-4995 and ask about invoicing arrangements when you schedule.
Property managers and landlords with multiple locations can discuss how billing is handled as part of the scheduling conversation. Each job is scoped and priced separately.
Older homes tend to have wiring that was installed under previous code standards, and the equipment in them, panels, outlets, switches, and fixtures, reflects what was available at the time. That can mean ungrounded outlets, a panel with limited breaker capacity, or wiring materials that require more care at every connection point. A newer property may have different issues, like circuits that were not sized for the loads the current occupant is running. The age of the property shapes what the diagnostic looks for, but any property can turn up something unexpected once the work starts.
The key is a transfer switch, which isolates the home's circuits from the utility line before the generator is energized. Without a transfer switch, a generator connected directly to the panel can send power back into the utility line, which is a hazard to anyone working to restore power. We install the transfer switch and handle all the wiring between the generator and the panel.
A warm outlet cover, a ceiling fan that wobbles more than it should, a single breaker that trips every few weeks - those are worth a call, not something to watch and wait on. Small electrical problems have a way of staying small, or they have a way of not staying small. The only way to know which one you are dealing with is to have someone look at it.
Local means we care what the neighbors think. That shapes how we approach every job, whether it is a ceiling fan swap or a full panel replacement.
Call (636) 746-4995 every day from 8:30 AM to 8:00 PM.
Power restored. Code-compliant. Done right.
Just as close, we take electrical work in: University City, Webster Groves, Creve Coeur, Affton, Crestwood.
Check our full coverage area.
Electrical work covers a wide range of jobs, and knowing what each service involves helps you call with confidence. The table below lays out what we handle, who each service fits best, and a practical note to keep in mind.
Call (636) 746-4995 to talk through what you are seeing and get a price before anything is scheduled.
| Service | What's Included | When You Need It | What to Keep in Mind |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | Load calculation, Panel replacement, Service-entrance work, Circuit adjustments to current code | Older homes adding EV chargers, appliances, or home office loads | A panel upgrade is often required before a home can be sold or before an insurance carrier will renew a policy on older wiring. |
| Breaker & Fuse Repair | Breaker that trips or won't reset, Fuse box assessment, Breaker replacement, Panel interior inspection | Homes where a circuit keeps going out under normal loads | A breaker that trips repeatedly under normal use is telling you something. Resetting it without diagnosing the cause does not fix the underlying problem. |
| Wiring & Circuit Installation | New circuit runs, Wiring for additions and remodels, Circuit mapping, Code-compliant rough-in and finish wiring | Remodels, additions, or any project that needs new circuits run from the panel | Wiring inside finished walls takes more time than open-stud work. We scope the access situation on the call so the job is planned correctly before we arrive. |
Call (636) 746-4995 to talk through your electrical situation and get a price before anything is scheduled.
(636) 746-4995